3 Stainless 94-01 Acura Integra Exhaust Kit KTeller Custom Exhaust

94-01 Acura Integra Exhaust Kit. This'Kit' is just the tubing portion of the cat-back exhaust system, no muffler or resonator is included. This kit will allow you to use any muffler you choose and design your own custom exhaust system. This kit is designed for high exhaust flow and easy installation.

The exhaust flow has few obstacles because the kit is made with only smooth mandrel bends. The kit follows the OEM path and is routed like the OEM system. This kit is a single exit setup and should be installed as such for best fitment. Hardware, such as: hangers, flanges are included with this kit, however; the hardware does not come pre-welded and must be spot welded at the time of install. Due to the difference in many customers cars and setups, some fabrication (modifications) might be needed. Hangers can easily be welded while the muffler is being installed.

Hardware is not stainless steel, if you need stainless hanger, clamps, V Bands or flanges, Vibrant Performance offers these and they are available to order in the Exhaust Hardware. Section of our website or your favorite Vibrant authorized vendor. Kits are made to order and bent in batches, we bend 3" at one time, then tooling is changed to 2.5".

We bend 2.5" kits and when done, then change back to 3" and so forth. We offer our kits in two tubing materials. The exhaust systems are offered in 409 stainless steel and an aluminized? Stainless steel is said to last? And should never rust, while aluminized kits may show signs of rust and wear if not properly cared for.

You will find the type of kit you are purchasing in the title and listing name above. The piping used is measured in OD (Outside Diameter) and should be noticed when researching ground clearance and other specs.

Please factor this in when measuring for clearance around sway bars and also cars that are extremely low.

---